PolyTerra™ PLA is a matte surface PLA-based 3D printing filament with a huge range of colors and effects to choose from. It is an extremely easy to print filament with great bridging & overhang qualities. It can print in a very wide temperature window and is compatible with all extrusion-based 3D printers.
Printing Temperature:
190ËšC - 230ËšC
Bed Temperature:
25ËšC - 60ËšC
Printing Speed:
30mm/s - 70mm/s
Fan:
ON
Direct Drive Retraction Distance:
1mm
Direct Drive Retraction Speed:
20mm/s
Indirect Drive Retraction Distance:
3mm
Indirect Drive Retraction Speed:
40mm/s
Drying Settings:
55ËšC for 6h
Dry Settings Notes:
(Only if the material has absorbed moisture)
DISCLAIMER:
The created printing profiles are intended for reference only. They should not be used for design specifications or quality control purposes.
End-use performance of printed parts depends not only on materials and printing conditions but also on part design, environmental conditions, etc. Printing profiles are subject to change without notice. Each user is responsible for determining the safety, lawfulness, and technical suitability of recommended printing profiles for the intended application. Polymaker makes no warranty of any kind unless announced separately, to the fitness for any use or application. Polymaker shall not be made liable for any damage, injury or loss induced by the use of recommended printing profiles in any application.
PolyTerra™ Series
Jam-Free™ technology improves the heat stability of Polymaker’s PLA filaments with softening temperatures over 140 °C. As a result, Polymaker’s PLA filaments show minimal softening in the “cold end” and can melt rapidly once entering the heating zone, leading to excellent printing quality with zero risk of nozzle jams.
Please fill in the form below or if you have other questions are not included in the form, please contact us through inquiry.na@polymaker.revolware.com. We will get back to you soon.
Please fill in the form below or if you have other questions are not included in the form, please contact us through contact.ppac@polymaker.revolware.com. We will get back to you soon.
