PolyLite™ LW-PLA is a low-density PLA that uses Polymaker’s Stabilized Foaming™ technology. This technology allows the PLA to re-foam after extrusion introducing a lattice foam structure that decreases the density by 30%. It prints using regular PLA settings and also produces a naturally matte surface finish which can hide the layer lines. LW-PLA is the perfect candidate where weight is critical and is popular among aerodynamicists.
Printing Temperature:
190˚C - 210˚C
Bed Temperature:
30˚C - 50˚C
Printing Speed:
25mm/s - 60mm/s
Fan:
ON
Direct Drive Retraction Distance:
3mm
Direct Drive Retraction Speed:
40mm/s
Indirect Drive Retraction Distance:
6mm
Indirect Drive Retraction Speed:
60mm
Drying Settings:
55˚C for 6h
Dry Settings Notes:
(Only if the material has absorbed moisture)
DISCLAIMER:
The created printing profiles are intended for reference only. They should not be used for design specifications or quality control purposes.
End-use performance of printed parts depends not only on materials and printing conditions but also on part design, environmental conditions, etc. Printing profiles are subject to change without notice. Each user is responsible for determining the safety, lawfulness, and technical suitability of recommended printing profiles for the intended application. Polymaker makes no warranty of any kind unless announced separately, to the fitness for any use or application. Polymaker shall not be made liable for any damage, injury or loss induced by the use of recommended printing profiles in any application.
No SKUs found!
PolyLite™ Series
Jam-Free™ technology improves the heat stability of Polymaker’s PLA filaments with softening temperatures over 140 °C. As a result, Polymaker’s PLA filaments show minimal softening in the “cold end” and can melt rapidly once entering the heating zone, leading to excellent printing quality with zero risk of nozzle jams
Stabilized Foaming technology
Please fill in the form below or if you have other questions are not included in the form, please contact us through inquiry.na@polymaker.revolware.com. We will get back to you soon.
Please fill in the form below or if you have other questions are not included in the form, please contact us through contact.ppac@polymaker.revolware.com. We will get back to you soon.
