PolyLite™ ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. It delivers excellent printing quality with minimal odor during printing. Combining impact resistance with heat resistance (~100˚C), PolyLite™ ABS is a good choice for mechanical parts, robotics, functional prototyping or home appliance spare parts.
Printing Temperature:
245˚C - 265˚C
Bed Temperature:
90˚C - 100˚C
Printing Speed:
30mm/s -50mm/s
Fan:
OFF
Direct Drive Retraction Distance:
3mm
Direct Drive Retraction Speed:
40mm/s
Indirect Drive Retraction Distance:
1mm
Indirect Drive Retraction Speed:
20mm
Drying Settings:
70˚C for 6h
Dry Settings Notes:
(Only if the material has absorbed moisture)
DISCLAIMER:
The created printing profiles are intended for reference only. They should not be used for design specifications or quality control purposes.
End-use performance of printed parts depends not only on materials and printing conditions but also on part design, environmental conditions, etc. Printing profiles are subject to change without notice. Each user is responsible for determining the safety, lawfulness, and technical suitability of recommended printing profiles for the intended application. Polymaker makes no warranty of any kind unless announced separately, to the fitness for any use or application. Polymaker shall not be made liable for any damage, injury or loss induced by the use of recommended printing profiles in any application.
No SKUs found!
PolyLite™ Series
Please fill in the form below or if you have other questions are not included in the form, please contact us through inquiry.na@polymaker.revolware.com. We will get back to you soon.
Please fill in the form below or if you have other questions are not included in the form, please contact us through contact.ppac@polymaker.revolware.com. We will get back to you soon.
